Overview
  Installation
  Manager update
  Welcome
  Device recognition
  Firmware update
  Selecting firmware to update
  Updating firmware
   Pressing the [UPDATE] button at the [Firmware update] page triggers updating firmware. The manager takes steps as below:
  1. Making backup firmware information file.
  2. Setting the device in the mode of updating firmware by following instruction in the popup screen.

    3. NOTE : Instruction in the popup screen may vary depending on device.
Instruction of setting the device in the mode of updating firmware
  1. Writing the firmware to the device.
  2. Setting the device in the mode of managing the device by following instruction in the popup screen.

    3. NOTE : It may take about 30 seconds to finish step 4 - setting the device in the mode of managing the device.
    NOTE : At step 4, if instruction screen does not disappear even though two buttons have been pressed for over 30 seconds, the USB cable may be unplugged.
    NOTE : Instruction in the popup screen may vary depending on device.
    NOTE : The popup screen may not appear depending on device.
Instruction of setting the device in the mode of managing the device
  1. Recognizing device after successfully updating firmware.
  2. Displaying the [Firmware update] page with information of device with new firmware.
Firmware updated successfully
   Please refer to the [Failure in updating firmware] for more details about failure in updating firmware.
  Failure in updating firmware
  Firmware restore
  Device setting
  Miscellaneous